Articles

Practical guidance on wash bays, wash water treatment, and environmental compliance from the team that designs, builds, and services them.

STAY CONNECTED

Signup for our blog to receive tips and knowledge on industrial wash and wash water treatment best practices.

Please enter your name.
Please enter a valid email address.
Something went wrong. Please check your entries and try again.

Work with Us

Don’t settle for less than a solution from a partner who takes complete responsibility from start to finish. We make it easy to keep things clean and compliance effortless. Contact us today to discuss your wash water treatment and industrial wash needs.

Installing a Wash Pad at -40°F: Field Notes From Prudhoe Bay

November 16, 2026

Project Summary  In March 2021, Evans Lead Technician Thomas LeBlanc installed a portable wash pad and Evans Bio System for an oilfield customer at Prudhoe Bay, Alaska. Outside the building, temperatures held near -40°F all week. Freezing cracked the system’s process pump before commissioning. Thomas and the customer’s site contact patched it on the spot, […]

Commercial Pressure Washers for Oilfield Services and Refinery Work

November 11, 2026

Every gallon a pressure washer sprays on oilfield equipment leaves carrying drilling mud, oil, and grease. Where that water goes next determines whether you’re compliant. The Clean Water Act bars discharging pollutants to U.S. waters without a permit. EPA Region 6, which covers Louisiana and Texas, names washing into a storm sewer or a street […]

Pressure Washer Repair, Parts, and Rebuild Kits: What to Know Before You Call

October 19, 2026

Things break. In this line of work, what matters next is how quickly you get back up and running. We’ve been around since 1987, and we repair and service pressure washers at Evans branches in Baton Rouge, Lafayette, Houston, New Orleans, and Corpus Christi. Those same branches support parts, accessories, and chemicals, and we build, […]

The $5 Fitting That Saved a Customer $8,000

October 8, 2026

A routine maintenance visit from Evans traced a failing natural gas pressure washer to one wrong valve at the machine’s gas inlet. Three companies told the customer to replace the building’s gas line, and a plumber quoted $8,000 to $10,000. The replacement fitting cost about five dollars. Lead Installer and Technician Jade Labit has worked […]

How a Portable Wash Rack Installation Works

September 17, 2026

Inside the Gulf Coast fall turnaround season, refineries and petrochemical facilities across Louisiana and Texas pull major process units offline in sequence, after summer driving demand subsides and before winter heating demand returns. Wash containment either arrives before the outage opens, or the facility carries the cost of its absence for the rest of the […]

Bean Pump for Sale or Rental: How to Choose the Right One

September 14, 2026

When dealing with heavy contamination, a high-pressure bean pump is often the best equipment to get you through it. The harder question is whether to look for a bean pump for sale to keep on site or cover the work with a bean pump rental instead. The right answer largely depends on how often you […]

Closed-Loop Wash Water Treatment Systems: How They Work

August 20, 2026

If you wash heavy equipment, you already know the water running off the frame carries sediment, grease, oil, and hydrocarbons, and where it goes next is either a managed process or a costly liability. A closed-loop wash water treatment system captures that water on-site, then treats it through a sequence of staged processes before returning […]

Choosing the Right Location for Your Wash Bay

August 12, 2026

Washing your fleet and heavy equipment isn’t about keeping it shiny. Dirt, grease, and road salt hide mechanical problems, wear down components, and cut years off the lifespan of your valuable assets. To combat this, investing in a dedicated wash bay is one of the smartest decisions a facility manager can make. But a wash […]

Temporary Jobsite, Permanent Liability: When a Portable Wash Pad Beats a Storm

July 13, 2026

Your crew mobilizes to a site with a hard end date. Four months, maybe six. You bring the equipment, the operators, and the pressure washer, and you wash where it makes sense: a gravel pad near the yard, graded slightly downhill. The setup holds through a dry stretch. Then a July storm parks over the […]

Counting Contractors: How Many Vendors Does It Take to Build a Custom Wash Bay?

June 15, 2026

Building a permanent wash bay usually involves seven or more separate vendors, including a civil engineer, a concrete contractor, a plumber, an equipment supplier, a water treatment provider, an electrician, and a permitting specialist. The build is the easy part to picture. Managing everyone around it is the part that quickly turns into a second […]